FAQs
Q. How do I care for my Cragar Classic wheels?
To keep your Cragar wheels looking good use soap and water to clean them, you may also use Windex. Once a month use a no abrasive car wax on them.Q. How do I balance a unilug wheel?
All Cragar unilug wheels are lug centric and must be balanced through out the lug nut holes.Q. Do you make a Cragar S/S to fit a 6-lug truck?
No, the S/S will not fit 6 lug as it would have to have 6 spokes.Q. Can I buy direct from the factory?
No, we only sell to wheel and tire warehouses. Check our Where to Buy page on this website.Q. Do you make a front wheel drive S/S wheel?
No, the S/S is only made in rear wheel drive.Q. Do you still make Cragar louvers?
No, Cragar louvers were marketed though the Mr. Gasket Co. and we have no information on them.Q. What is backspacing?
Backspacing is the distance from the mounting surface of the wheel, which contacts the hub, to the back rim flange.Q. How do you measure the bolt pattern?
On a five lug pattern you measure from the center of one stud, skip a stud, and to the far side of the third stud.
